UPS F.910
BOILER WATER TREATMENT
DESCRIPTION :
Boiler Water Treatment is a innovative product applied to all types of boiler systems for water treatment. It provides excess protection from the hard, sludge concentration and corrosion, while it removes dissolved oxygen. Furthermore, it acts as an antifoam agent.
PHYSICAL PROPERTIES
Boiler Water Treatment is a liquid solution of alkaline compounds, oxygen binders, corrosion inhibitors, sludge conditioners and antifoam agents
Appearance/color : Colorless liquid
Specific gravity : 1.00-1.10/15¡C
PH : 9.0-10.0
Odor : odorless
CHARACTERISTICS
- One product does it all
- Prevents salt corrosion through hardness control.
- Acts as an oxygen scavenger in boilerwater.
- Raises pH.
- Acts as a corrosion inhibitor.
- Acts as an antifoam agent.
- Submerges suspended solids thus assisting to easy and sufficient blow down.
- Effeciently protects of the boiler surfaces.
- It is cost effective, easy to handle and aplly
APPLICATION AND USE
A. DOSAGE :
Initially, use 1 litre of Boiler Water Treatment per
Ton of water. Thereafter, a volume of 50 - 60 ml
Per ton of water should be used daily.
To reach optimal results, consult the UPS Ship’s Chemical Log Book for Boiler Water Treatment on a daily basis. This will allow to observe and evaluate the test results trend in order to use the exact amount needed for the stabilization of the system.
Note that boiler water sample analyses must be conducted frequently (every 2 days), if not daily, using the UPS Alkalinity, phospahte and sulfite.
B. FEEDING PROCEDURE:
Once the dosing quantity is determined, Boiler water Treatment must be introduced to the boiler’s water, continuously, by a metering pump or by conventional ways such as metallic container, plastic pail, etc.
